FLOORING MATERIALS

Pentens E-10F Fast Setting Water-Based Epoxy Bonding Agent

Pentens® E-10F is a fast setting reactive two-component system, consisting of modified phenol type epoxy resin (A-Comp.) and water-emulsified epoxy resin hardener (B-Comp.). This system could actually be formulated using water as a carrier and still produce film with outstanding appearance.Pentens® E-10F is safe to use in sensitive locations is environmentally friendly with extremely low VOCs (Volatile Organic Compounds).

Pentens E-500 Solvent Free, Low Viscosity Epoxy Resin

Pentens® E-500 is resistant to high mechanical loads thanks to its strong surface and wear and tear resistance. This makes it an economical solution for mechanically loaded areas.
 

Pentens E-501LN Tank Lining Epoxy Coating

Pentens® E-501LN Tank Lining Epoxy is a 100% solids modified epoxy coating designed for high performance waterproofing, chemical resistance and traffic compatibility under a wide range of application and service conditions. Pentens® E-501LN features odorless application, “zero” VOC content, low viscosity and self-priming to concrete, steel, aluminum, ceramic tile*, plywood, natural stone, glass*, vinyl tile and many other substrates. (*Note: Some glassy surfaces require use of adhesion-promoting additives.) Clear or a wide range of colors is available.

Pentens E-501S High Performance Sovent Free Epoxy Putty Filler

Pentens® E-501S, a high strength, excellent adhesion, ready-to-use, solvent-free, two-part epoxy putty filler. Formulated to a smooth creamy consistency, it mixes easily and can be used for sealing vertical, horizontal, and overhead cracks or voids on the surface of concrete before applying various types of finishing and coatings. Ideal for bonding injection ports of Low Pressure Epoxy Crack Injection System to concrete, steel and timber as it does not shrink or sag and can be easily sanded to a smooth surface.

Pentens® E-501S is safe to use in sensitive locations and it is environmentally friendly with extremely low VOCs (Volatile Organic Compounds).

Pentens E-501 Solvent Free Epoxy Resin for Motar Floor

Pentens® E-501 is a two-component epoxy resin and hardener mix with graded aggregate to achieve desired thickness. Pentens® E-501 is designed specifically for heavy load and industrial use.

Pentens ECO-600TR Epoxy Clear Coat

Pentens® ECO-600TR is a special formulated two component solvent-less epoxy transparent coating which is good abrasion resistant chemical resistant high polish gloss floor protective coat.

Pentens E-601 Solvent Free, Self-Leveling Epoxy Top Coat

Pentens® E-601 is a two-component modified epoxy resin mixed with pigments (A-Comp.), and polyamine hardener (B-Comp.)

Pentens® E-601 is a High Build Coating Systems are available in a variety of thicknesses (2 to 3 mm typical). The glossy, easy-to-maintain surface resists dirt and chemical penetration while enhancing the appearance and light reflectivity of your facility.
 

Pentens E-610CR High Performance, Chemical-Resistant Epoxy Resin

Pentens® E-610CR is a 100% solids, pigmented, two-component solvent free epoxy resin. It is highly resistant to acids, alkalis and a broad range of chemicals.Pentens® E-610CR is ideal for use as a protective coating for concrete and steel in extremely corrosive areas where resistance to 99% Glacial acetic acid and 70% sulfuric acid or other strong caustics is needed.

Pentens E-620F Water-Based Epoxy Coating

Pentens® E-620F is a pigmented, reactive two-component system, consisting of water-emulsified epoxy resin hardener (A-Comp.) and. modified phenol type epoxy resin (B-Comp.) This system could actually be formulated using water as a carrier and still produce film with outstanding appearance.

Pentens® E-620F is safe to use in sensitive locations and it is environmentally friendly with extremely low V.O.C.(volatile organic compound). It makes an ideal moisture barrier for water tanks, reservoirs, swimming pools, storage tanks. 
 

Pentens NPU-12 Water-Based Polyurethane Nano Coating

Pentens® NPU-12 is a nanotechnology HDI based polyurethane coating of finest quality, durable, water repellent, fungus/algae/bacteria resistant, UV resistant, scratch resistant, anti-corrosive sealer, primer & finish for a wide variety of exterior and interior surfaces.

Pentens T-250 Colorful Wear-Resistant Surface Coating

Pentens® T-250 is a specially formulated mineral based coating system of inorganic nature for both exterior and interior use. As a decorative and protective finish, Pentens® T-250 has outstanding durability. When applied correctly to a suitable backing, it will neither flake nor peel. What makes Pentens® T-250 durable is an acrylic-based resin and selected pigments to which are added mica, hollow ceramics, and fine hard aggregates, to ensure long life and special anti-slip properties. Pentens® T-250 also contains a biocide which combats bacterial and fungus growth.

Please reload